If you are buying a stair with balusters in a contrasting material, like painted balusters on an oak stair, questions will likely arise with regards to the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters installed when the stair is completed?
Here are a few facts to consider with Stair Railings: Your painter will usually choose painting the balusters before installation. This allows them to be sprayed rather than brushed and eliminates lots of “cut-in” work.
Painting balusters separately does mean that this stair installers will have to return to the web page, remove the railings and install the balusters. You will have charge for this particular “second trip” to the jobsite. You will have to be sure you schedule this “second trip” in coordination with all the completing the conclusion.
Leaving your balusters out for painting means that they will probably be lost or stolen during this time period. You will be accountable for balusters left on the jobsite. Once the painted balusters are finally installed, you will see additional “touch-up finishing required at the rail joints. Holes will need to be filled and stain and finish re-requested the last finish.
Plan installing of your hardwood stair for after your drywall has become taped, sanded, and primed. The drywall process can cause damage to the stair. Drywall mud and paint overspray can make the stair finishing process extremely tough and might make desired results impossible to achieve.
Most hardwoods are an open grain wood and once dirt gets a part of open grain it is quite challenging to remove, despite sanding. This will possess a negative effect on the appearance and texture from the finish. Care should also be used to safeguard the stair from dirt and mud.
Never Cover Hardwood Stairs With Plastic. Plastic will not allow airflow, trapping moisture underneath and resulting in the wood to grow and contract. This expansion and contraction causes the wood joints to open up and may make the wood to break into.
The environmental conditions inside the house are important to the standard of the stair. Hardwood lumber has been dried through a very controlled process for an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to remain stable under normal conditions.
In cold climates, whenever a property is heated to a high temperature in the wintertime, the air could become very dry, resulting in the wood to shrink. This shrinkage will make cracks visible within the wood and joints may begin to open up. Subjecting a stair to high levels of heat is similar to putting it inside an oven and can accelerate the deterioration of the stair.
All hardwoods should be sealed on every side to retard movement and protect from being exposed to elements and damage. It is suggested to seal wood immediately.